Key Steps to Water Damage Restoration

When dealing with water damage to your home or business, it isn’t important whether the spill is large or small. The basic goal is always the same, to clean the water and dry out everything. This should be done as soon as possible after the damage has occurred. You must act quickly. 

Of course, acting fast doesn’t mean acting ignorantly. A lot of what is needed to properly deal with water damage may be taken care of right now, before disaster strikes and leaves you hip deep in raw sewage. Taking the opportunity to make certain your insurance covers water related issues is wise. Remember that if the problem can be traced back to homeowner negligence, then it will not be covered.

Transfer appliances and valuable items to higher floors, and elevate power outlets and electrical boxes to higher wall positions. Of course, none of this can ensure less damage to your house, but it can not hurt either.

Water damage restoration is an involved, multi-layered procedure, consisting of specific measures that have to be taken in a certain order to ensure success. Attempting to do so will result in a few of the following problems listed above.

Water Extraction – this is the procedure for removing the excess water from your premises and is normally achieved via the use of a wet-dry vacuum device or gas powered submersible pump. No electrical pumps should be utilized, and do not attempt to use your regular vacuum cleaner to eliminate water. You will only wind up getting a new vacuum cleaner. Trust me.

If the flooding is in your cellar, be cautious not to pump out the water too fast. This could lead to sudden pressure changes that may weaken your cellar walls, making them prone to collapse. Pump out the water at the rate of about 1/3 per day. Most of the water may be removed via the water extraction procedure.

Secondary Drying – once the excess water is out, surfaces may appear dry, but a cursory bit will reveal that they are not. They’ll retain a substantial quantity of water, and the only way to dry out it is via the flow of air. Open all windows and doors to get air moving throughout the home. Bring in several high-velocity fans and blowers (the more the merrier) and dehumidifiers to help the process along. Move the units around every few hours to guarantee complete drying coverage, and let a few times for the process to finish.

Repair – this requires the cleaning and cleaning of all items damaged by water and might be the single most time-consuming step in the process. Damaged items should be taken out of the area and repaired elsewhere. They might require cleanup, and sometimes, disinfecting. In cases of sewage-based water damage, it might become an issue of determining what can be salvaged and what ought to be thrown out.

Restoration – this is the process of taking good care of the nice detail elements designed to return your house to its pre-loss condition. At this point, the home is ready to welcome back its inhabitants.

Of course, the procedure might be more difficult than described, especially in bigger instances of water damage, however, the overall concept and management remain unchanged. The procedure may also occur over a period of days or even weeks, again, based on the size. The scope of the project alone makes it beyond the abilities of most homeowners.

This is why you should contact your regional IICRC certified water damage restoration professionals. They are available 24/7 to service all your flood restoration and water damage requirements. A phone call gets a technician to your home within the hour, prepared to assess your situation, and start water restoration processes instantly.

To learn more about home flooding security, check out how to protect your house from floods and everything to do following a basement flooding. For flooding water damage repair and mold remediation service, contact the PuroClean Wentzville office. or visit them for more information